YASKAWA YRC1000 Startup Manual page 45

VERSION 5.3.0
Press Set Flow, then tap Close until you are out of the Monitor.
e
If you made any changes, restart the robot controller. Once the robot controller restarts, enable Safety
f
Mode and check again to make sure the correct application is running..
From the Main Menu, tap EX. MEMORY , then tap FOLDER to select the folder to load files from.
7
Tap the forge-os folder to open it, then tap to open the yaskawa folder. At the top of the screen, the
a
TARGET FOLDER should be yaskawa.
From the Main Menu tap EX. MEMORY and then tap LOAD.
b
© 2022 COPYRIGHT READY Robotics ALL RIGHTS RESERVED
45