MTU Detroit Diesel 183 Series Technical Publication page 572

Group 20
Subgroup 2570a
Page 2
Plate-type cooler installation components
1 Tab washer
2 Hex screw M12x260
3 Cover plate
4 Grooved pin 2.5x5
5 Sign - plate arrangement
and block dimension
6 Sealing ring A26x37
7 Threaded pin
8 Elbow, raw water inlet
9 Sealing ring A18x22
10 Plug M18x1.5
11 Gasket
12 Spring washer
13 Stud
14 Hex nut
15 Flange
16 Spring washer
17 Hex screw M8x25
18 Elbow, raw water outlet
19 Spring washer
20 Hex screw M8x20
21 Hex screw M8x65
22 Sealing ring
23 Sleeve
20080/1 E 98-12
lubricated with Ultratherm paste
tighten diagonally and evenly.
pretightening 25 + 3 Nm.
further tightening 45 + 5 Nm, but not over block dimension,
see sign
attached to cover plate.
as per MTV 5008, Part 2
replace.
replace.
replace, both sides sealed with surface sealant,
aux. No. 40 031
replace.
Task Description