MTU Detroit Diesel 183 Series Technical Publication page 484

Group 18
Subgroup 7109
Page 2
Disassembly, assembly
20080/0 E 98-04
Remove plug (1) for oil filling.
Installation instructions
Replace sealing ring (2) and tighten plug (1), 80 Nm.
Remove hex screws (8) for oil cooler and remove oil
cooler.
Installation instructions
Tighten hex screws (8) to 25 Nm.
Fit graphitised side of gasket (7) in direction of oil
cooler.
Assemble in reverse sequence.
Task Description