MTU Detroit Diesel 183 Series Technical Publication page 125

Task Description
01-9314 Measuring Cylinder Liner Protrusion
Preparatory operation:
Cylinder head removed (01-6110).
Special tools
20080/1 E 98-12
Measurement
Clean cylinder liner collar.
Place measuring plate on cylinder liner.
Tighten short cylinder head screws with spacer sleeve
(1) to 50 Nm.
Measuring plate
Mount dial gauge holder (C) on measuring plate and
install the dial gauge (A) with extension so that the
feeler is pretensioned on the cylinder crankcase. Screw
in dial gauge.
Set dial gauge scale to "0" and measure the cylinder
liner protrusion at 4 different points.
A Dial gauge
B Measuring plate
C Dial gauge holder
Cylinder liner protrusion,
See Tolerance and Wear Limits List (01-9304)
Group
Subgroup
Page
402 589 00 21 00
001 589 53 21 00
402 589 00 21 00
343 589 00 40 00
01
9314
1