MTU Detroit Diesel 183 Series Technical Publication page 129

Task Description
20080/1 E 98-12
Inspection and repair
Check liner for cracks and cavitation
Clean liner and test with magnetic particle inspection
and fluorescent magnetic-powder penetration methods
for cracks (3).
Replace liner if cracks are found.
Check outer wall for cavitiation (2) and corrosion,
replace liner if necessary.
If light cavitation and corrosion is found, rotate liner by
90° before re-installing.
Inspect sealing and mating surfaces of collar (1) for
damage and wear; replace liner if necessary.
Replace sealing rings and tombac ring
Inspect liner surface.
Check surface for polished areas, scoring and
corrosion, replace liner if necessary.
Surface should show no signs of heat discolouration.
Check the return stroke position of the first piston ring
for wear, replace liner if necessary.
Group 01
Subgroup 9324
Page 3