MTU Detroit Diesel 183 Series Technical Publication page 178

Group 03
Subgroup 6312
Page 2
Special tool
Equipment
Bore gauge 50 - 100 mm
Micrometer 75 - 100 mm
20080/1 E 98-12
Storage
Note:
Conrod bearing shells are ready for installation when
supplied. No reconditioning can be carried out. Bearing
shell halves with dark reverse side must be installed on
the rod side because they are specially treated for high
pressures.
Clean bearings of conrod and bearing cap with chamois
leather only.
Insert bearing shell halves in correct sequence into
conrods and bearing cap. Position securing lug (arrow)
of bearing shell (1) into groove of main bore.
Fit bearing caps with appropriate bearing shells on
conrods.
Task Description