MTU Detroit Diesel 183 Series Technical Publication page 463

Task Description
Installation
Note:
Before installation, remove all blanking plugs.
Compressed air is air which has been compressed under pressure. Risk of injury!
Always wear protective goggles when blowing out or drying out with compressed air.
Blow out oil lines with compressed air and ensure that they are perfectly clean.
Install oil lines with new sealing rings, gaskets with connecting and fixture components free of tension in accordance
with overview drawings.
Note:
After engine start, visually inspect oil lines for leaks.
20080/1 E 98-12
Caution!
The pressure must not exceed 3 bar.
Group 18
Subgroup 1600
Page 5