MTU Detroit Diesel 183 Series Technical Publication page 193

Task Description
20080/1 E 98-12
Guide band clamp over piston rings and compress to
outside diameter of piston.
Band clamp 000 589 38 31 00
Check code markings (arrow) on bearing cap and
conrod.
Insert conrod bearing shell (4) into conrod. Lug (arrow)
of conrod bearing shell must be seated in groove of
connecting rod.
Note
Bores in conrod bearing shell and conrod must be
aligned.
Coat running surface of conrod bearing shells with
engine oil.
Group 03
Subgroup 7004
Page 13