MTU Detroit Diesel 183 Series Technical Publication page 334

Group 07
Subgroup 8410
Seite 10
20080/1 E 98-12
Tighten oil pressure line with new gasket on
turbocharger and new sealing rings on crankcase, 25
Nm.
Fit injection lines free of tension and tighten, 25 Nm.
Hold pipe connection of injection pump firmly in
position.
Box wrench insert
Serrated wrench
Note
Ensure that injection lines are installed in the correct
order.
Remove rotator on gear case.
Install charge air manifold (09-8621).
Note
Prior to initial operation, fill governor housing with 1.5 l
of engine oil (only for Bosch governors).
Task Description
000 589 68 03 00.
000 589 50 03 00,