MTU Detroit Diesel 183 Series Technical Publication page 51

General
00-0008 Engine Removal
Instructions for carrying out work
− B = Operating Instructions
Operations
Shut off fuel supply line
Shut off compressed air supply
Shut off raw water supply line
Drain oil with engine warm when possible
Drain oil sludge from engine oil filter
Oil sludge metallic residue check
Drain engine coolant when temperature of coolant is below 60°C
Drain raw water (sea water)
Wash machinery plant; do not use chemical solvents
Release all connections
Seal open connections with lint-free plugs and covers
Remove engine securing bolts
Remove engine and support it on support pedestals
Install transportation locking devices (for road or rail transport)
Suspend engine only by purpose-designed attachments as per engine installation drawing (taking into
account centre of gravity and transport regulations).
Engine weight
See specification on engine nameplate
20080/1 E 98-12
Group 00
Subgroup 0008
Page 1
see
B
B
B
B
B
B
B
B
-