Group
13
Subgroup
7001
Page
16
20080/1 E 98-12
Tighten hex screw of drive gear (270 Nm).
Note
This value corresponds to an actual torque of 360 Nm.
Torque wrench (40), ratchet adapter (41) and box
wrench (42) must be positioned in one line with respect
to each other.
Box wrench (42)
Remove locking device, part No. 442 589 09 63 00.
Install steering assist pump (37) with new O-ring and
driver disc (38), tighten hex screws (60 Nm).
Insert conrod bearing shells in conrod cap and conrod.
The oil bores (arrows) in the conrod bearing and in the
conrod must be aligned.
The markings (43) on the conrod cap and (44) on the
conrod must be aligned.
Task Description
442 589 00 03 00