MTU Detroit Diesel 183 Series Technical Publication page 108

Group 01
Subgroup 8205
Page 4
20080/0 E 97-02
Mount the oil pan and tighten hex bolts and nuts.
− Tighten the corner hex bolts and nuts diagonally and
evenly A-C and B-D, 35 Nm.
− Tighten hex bolts and nuts in sequence around the
circumference to 35 Nm (starting from the last
tightened corner hex bolt or nut).
− Tighten the corner hex bolts and nuts to 35 Nm.
Install gear case cover and seal
(01-8000).
Install starter.
Install turbocharger (09-6030).
Mount intercooler.
Task Description