MTU Detroit Diesel 183 Series Technical Publication page 194

Group 03
Subgroup 7004
Page 14
20080/1 E 98-12
Insert piston in cylinder liner in direction of arrow to
engine centre.
Press in piston until conrod bearing contacts the
crankpin on crankshaft.
Notes
Do not damage or warp oil spray nozzle when installing
piston.
In event of damage, remove oil spray nozzle, check and
install (18-5471).
Insert conrod bearing shell (4) into conrod bearing cap.
Lug (arrow) of conrod bearing shell must be seated in
groove of conrod bearing cap.
Coat running surface of conrod bearing shells with
engine oil.
Measure shaft length (max. 68.5 mm) of conrod bearing
screws.
Task Description