Group
05
Subgroup
7102
Page
6
20080/1 E 98-12
Insert spindle pipe (8) into bearing flange (5).
Turn spindle pipe (8) until stop pin (10) engages in
groove (arrow) of spindle pipe (8).
Fit camshaft bearing (14) on bearing retainer (9),
secure (arrows) and lubricate externally.
Insert spindle pipe into crankcase and insert bearing
retainer with camshaft bearing (14) behind relevant
bearing so that camshaft bearing (14) points in direction
of cross handle.
Note
Install a maximum of two camshaft bearings (14) per
operation.
When pulling inner camshaft bearings into bearing bore
of collar bearing, install locating ring (11).
Task Description