MTU Detroit Diesel 183 Series Technical Publication page 401

Task Description
20080/1 E 98-12
Place locking device over crankshaft and secure.
Note
The crankshaft must be rotated until the crankpin is
facing upwards.
Locking device
Unscrew hex screw on front drive gear (32) with box
wrench insert and remove drive gear (32) with hex
screw.
Box wrench
Remove locking device, part No. 442 589 09 63 00.
Use an assembly lever to press crankshaft (28) from
bearing and remove bearing flange (25).
Note
When the crankshaft (28) is pressed out, the roller
bearing inner race must be held firmly in position
(arrow) to prevent it from falling into the gear case.
Group
Subgroup
Page
442 589 09 63 00
442 589 00 03 00
13
7001
9