MTU Detroit Diesel 183 Series Technical Publication page 114

Group 01
Subgroup 8825
Page 2
20080/1 E 98-12
Track ring replacement
Place the removal tool via the track ring on the
crankshaft and tighten the hex bolts (arrows).
Note
Track ring with a dust collar: Press off dust collar .
Pull off track ring.
Removal tool 442 589 00 33 00,
Heat new track ring to approx. 200°C.
Risk of injury!
Mount track ring on the crankshaft.
Mandrel 403 589 06 15 00.
Coat running face for the radial-lip oil seal with engine
oil.
Task Description
Notice!