MTU Detroit Diesel 183 Series Technical Publication page 415

Task Description
20080/1 E 98-12
Place locking device over connecting rod or crankshaft
and tighten.
Note
The crankshaft must be rotated until the crankpin with
connecting rod is facing upwards.
Locking device
Unscrew hex screw from drive gear (73) with box
wrench and remove drive gear (73) with hex screw.
Box wrench
Remove locking device.
Use an assembly lever to press crankshaft (68) with
connecting rod (69) out of bearing bush and remove
outer bearing flange (65).
Remove crankshaft (68) with connecting rod (69) from
above.
Group
Subgroup
Page
442 589 09 63 00
442 589 00 03 00
13
7001
23