MTU Detroit Diesel 183 Series Technical Publication page 448

Group 15
Subgroup 5030
Page 2
20080/1 E 98-12
Removal/installation
Disconnect battery negative terminal.
Separate earth connection.
Disconnect electrical wires from alternator.
Release clamping screw (38) on alternator.
Release V-belt with clamping nut (23) and remove via
belt pulley.
Installation instructions
Replace and tension V-belt (13-1402).
Tighten hex screw (38) for clamping element -
tightening torque 40 + 4 Nm.
Remove securing screws and securing nuts and
remove alternator.
Install in reverse order.
Task Description