MTU Detroit Diesel 183 Series Technical Publication page 473

Task Description
18-5471
REMOVAL AND INSTALLATION
Preparatory operations:
Crankshaft removed (03-4352).
Data
Oil spray nozzle inner dia.
Special tools
20080/1 E 98-12
OIL SPRAY NOZZLE
2 mm
Removal/installation
Remove oil spray nozzle (1) from crankcase.
Installation instructions:
The dowel pin of the oil spray nozzle (1) must engage in
the crankcase bore.
Tighten banjo screw (2) to 40 Nm.
Note:
After installing piston, bar engine and ensure there is
clearance between oil spray nozzle and piston.
Group 18
Subgroup 5471
Page 1