MTU Detroit Diesel 183 Series Technical Publication page 132

Group 01
Subgroup 9324
Page 6
20080/1 E 98-12
Coat sealing agent (bead of approx. 2-3 mm dia) in
front of the sealing ring on lining collar.
Note
Work with the sealing agent in viscous form only .
Spray gun 000 589 01 25 00
Apply thin coat of ATE assembly grease to exterior of
cylinder liner at lower fit surface and chamfer.
Insert cylinder liner into cylinder crankcase while it is
turned at 90° (arrows) to the old installation position.
Insert stud screws for the extractor and installation tool
in the threaded bores for the cylinder head screws
opposite.
Place the pressure plate (arrow) on the cylinder liner.
Place the extractor (spindle with counter support) on
stud screws and tighten.
Extractor and installation tool 403 589 00 33 00
Hold the cylinder liner by turning the
spindle at 100 Nm for 5 minutes under pretension.
Task Description