MTU Detroit Diesel 183 Series Technical Publication page 111

Task Description
20080/0 E 97-02
Remove the radial-lip oil seal (2) from the cover.
Note
Support the cover when removing the radial-lip oil seal .
Mandrel 312 589 13 15 00
Installation
Place the housing cover flatly on an even surface and
install radial-lip oil seal flush to the surface.
Mandrel 312 589 13 15 00
Oil track ring on the crankshaft and sealing lip on the
radial-lip oil seal.
Fit new gasket over guide pins on cylinder crankcase.
Mount housing cover with radial-lip oil seal and tighten
hex bolts (4) to 25 Nm.
Check security of radial-lip oil seal on crankshaft.
Tighten hex bolts and nuts for oil pan, 35 Nm.
Mount the injection ring.
Group 01
Subgroup 8810
Page 3