MTU Detroit Diesel 183 Series Technical Publication page 134

Group 01
Subgroup 9324
Page 8
20080/1 E 98-12
B Sealing with a tombac ring
Insert new, dry O-rings for the lower cylinder lining
sealing in the cylinder crankcase.
Place the tombac ring (1) via the cylinder liner on the
cylinder liner collar.
Insert new O-ring (3) for the upper cylinder liner sealing
in the cleaned recesses of the lining.
Note
The cylinder liner fillet (2) remains free.
Apply thin coat of ATE assembly grease to exterior of
cylinder liner at lower fit surface and chamfer.
Insert cylinder liner into cylinder crankcase while it is
turned at 90° (arrows) to the old installation position.
Task Description