Sequential Options - Sun Microsystems SPARCstorage Library Installation And User Manual

4

Sequential Options

4-8
With the Sequential Options, you can perform the following actions to control
how the cartridges are processed.
Restart option
On
Off
Loop option
On
Off
Note – The loop and restart options are application specific.
Restart Option
1. Select the Configuration Menu by pressing
2. Select Sequential Options by pressing
The following screen is displayed.
→ Loop:
Restart:
Loop2:
Restart2:
3. Select Restart for tape drive 1 or Restart2 for tape drive 2 by pressing
↓
.
4. Set Restart on or off by pressing
SPARCstorage Library Installation and User's Guide—June 1995
Determines whether the tape library restarts at the first
cartridge or restarts where it left off after a power-on or
reset.
Starts at the first cartridge
Restarts operation where it left off.
Determines if the tape library should stop after
processing all of the cartridges in the holder or loop back
to the first cartridge and continue processing.
Loops back to the first cartridge.
Stops processing cartridges after processing the last
cartridge.
↓
or
↓ ↑
or , then Enter.
OFF →
ON
OFF
ON
← →
or .
↑
, then Enter.
↑
or