Sun Microsystems SPARCstorage Library Installation And User Manual page 90

4
4-20
Park Test
The Park test moves the CHM to the top of the long axis, called the park
position.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Park by pressing
To abort this diagnostic, press Escape and Enter.
Move Cartridge Test
The Move Cartridge test picks a cartridge from one element index and moves it
to another.
Note – If you insert a tape cartridge into a drive, the drive does not
automatically eject the cartridge. The system displays an error message if there
is no cartridge in the source element slot or if the destination element slot is
full.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Move Cartridge by pressing
The system displays the following screen:
Set Source
↑ Increase
↓ Decrease
4. Select the element index of the cartridge slot from which you want the
CHM to pick the cartridge by pressing
The system displays the following screen:
Set Destination
↑ Increase
↓ Decrease
SPARCstorage Library Installation and User's Guide—June 1995
↓ ↑
or
↓
or
↓ ↑
or , then Enter.
↓ ↑
or
↓
or
↓ ↑
or , then Enter.
0
↑ ↓,
or then Enter.
, then Enter.
↑
, then Enter.
, then Enter.
↑
, then Enter.