Sun Microsystems SPARCstorage Library Installation And User Manual page 91

5. Select the element index of the cartridge slot from which you want the
CHM to place the cartridge by pressing
The CHM moves the cartridge from the source to the destination.
Scan Test
The Scan test scans all the elementsl. The information is stored in the cartridge
inventory. Scan errors and the contents of labels are displayed on the Label
Information screen.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Scan by pressing
The bar code scanner scans all the elements.
To abort this diagnostic, press Escape and Enter.
Scan With Range Test
The Scan With Range test scans a range of elements and stores the information
in the cartridge inventory. Scan errors and the contents of labels are displayed
on the Label Information screen.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Scan With Range by pressing
The system displays the following screen:
Set Scan Start
↑ Increase
↓ Decrease
4. Select the element index where you want the bar code scanner to begin
scanning by pressing
The system displays the following screen:
Set Scan Stop
↑ Increase
↓ Decrease
SPARCstorage Library Menu Functions
↑ ↓
or
↓
↓
or
↓ ↑
or , then Enter.
↓
or
↓
or
↓ ↑
or , then Enter.
0
↑ ↓
or , then Enter.
0
4
, then Enter.
↑
or , then Enter.
↑
, then Enter.
↑
, then Enter.
↑
, then Enter.
4-21