Set Date; Set Time - Sun Microsystems SPARCstorage Library Installation And User Manual

4

Set Date

Set Time

4-10
Use the Set Date screen to set the date shown on the diagnostic listings and the
command history screen
1. Select the Configuration Menu by pressing
2. Select Set Date by pressing
3. Set the date using these keys.
↑
Increases the day, month, or year.
↓
Decreases the day, month, or year.
→
Moves to the column on the right.
←
Moves to the column on the left.
Use the Set Time screen to set the time shown on the Main Screen and the
command history screen.
1. Select the Configuration Menu from the Primary Menu by
↓ ↑
pressing or , then Enter.
2. Select Set Time by pressing
3. Set the time using these keys.
↑
Increases the hours, minutes, or seconds.
↓
Decreases the hours, minutes, or seconds.
→
Moves to the column on the right.
←
Moves to the column on the left.
SPARCstorage Library Installation and User's Guide—June 1995
↓ ↑
or , then Enter.
↓ ↑
or , then Enter.
↓ ↑,
or then Enter.