Sun Microsystems SPARCstorage Library Installation And User Manual page 99

3. Check the settings of the various operating mode parameters. Scroll up by
↑
pressing or scroll down by pressing
The SCSI mode parameters screen provides the current (Cur), default (Def),
and saved (Sav) values for the following parameters.
Current (Cur)
Default (Def)
Saved (Sav)
The mode parameters for this menu are:
CHM Addr
Stor Addr
CTS Addr
CTS Num
Parity
Pty Retry
Security
Write Line 1 - 4
SPARCstorage Library Menu Functions
↓
.
The value currently active (either the power-on default
or a temporary value set by the latest MODE SELECT
command.
The original value set at the factory.
The value specified as the power-on default by a MODE
SELECT command. After specifying a value with the
MODE SELECT command, this value takes effect each
time you power on the tape library.
The element address of the cartridge handling
mechanism.
The element address of the fixed slot. The remaining
cartridge slots are numbered consecutively—starting
from the top cartridge.
The element address of the first cartridge tape subsystem
(CTS). The remaining CTS is numbered sequentially.
The number of CTSs installed.
Parity checking on the SCSI bus. When the parity option
is on (the default), the tape library checks all data
coming across the SCSI bus for parity.
The number of retries when a parity error is detected.
Indicates whether the SCSI security feature is on or off.
Indicates whether the text displayed on each of the four
lines on the main menu is defined for the LCD Mode
page.
4
4-29