Sun Microsystems SPARCstorage Library Installation And User Manual page 95

Cycle SAxis Test
The Cycle S Axis test positions the CHM in front of the fixed cartridge slot and
moves the CHM back and forth on the short axis the number of times you
specify.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Cycle S Axis by pressing
The system displays this screen:
Set Cycles
↑ Increase
↓ Decrease
4. Select the number of cycles (in increments of ten) you want the Cycle S
Axis test to run by pressing
The test positions the CHM in front of the fixed cartridge slot and moves the
CHM back and forth on the short axis the number of times you specify.
To abort this diagnostic, press Escape and Enter.
SPARCstorage Library Menu Functions
↓ ↑
or , then Enter.
↓ ↑
or , then Enter.
↓ ↑
or , then Enter.
10
↑ ↓
or , then Enter.
4
4-25