Sun Microsystems SPARCstorage Library Installation And User Manual page 108

4
4-38
Part of the Select Label Information screen is shown and described below:
Label:
Valid/Error: 0/0
Label
Label
Valid
Error
The following chart explains the information on the Label Information screen.
INX Element index for which information is being displayed.
Label If the element location contains a bar code that has been scanned, the
Label field contains the cartridge label.
Label Valid Indicates whether the field is accurate:
1 Label field is accurate.
0 Label field is not accurate.
The Label Error field indicates whether the bar code was unable to read the
cartridge label.
Table 4-5 Label Error Field Error Messages
Error
Code Description
0 Bar code scan was successful, a reset condition occurred, or the
door was open.
60 The bar code scanner could not read the bar code label because
there was no label on the cartridge.
61 The bar code scanner could not read the bar code label because the
label was unreadable.
62 The bar code scanner could not read the bar code label because the
cartridge holder or tape drive was not installed.
65 The bar code scanner could not read the bar code label because a
Direct Memory Access (DMA) overrun occurred.
69 The bar code scanner could not read the bar code label because the
label was upside down or misplaced.
SPARCstorage Library Installation and User's Guide—June 1995