Sun Microsystems SPARCstorage Library Installation And User Manual page 97

Cycle Solenoid Test
The Cycle Solenoid test exercises the solenoid that controls the locking
mechanism on the front door.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Cycle Solenoid by pressing
The system displays the following screen:
Set Cycles
↑ Increase
↓ Decrease
4. Select the number of cycles, in increments of ten, (up to 250) you want the
Cycle Solenoid test to run by pressing
You will hear a clicking sound.
To abort this diagnostic, press Escape and Enter.
SPARCstorage Library Menu Functions
↓ ↑,
or then Enter.
↓ ↑
or , then Enter.
↓ ↑
or , then Enter.
10
↑ ↓
or , then Enter.
4
4-27