Sun Microsystems SPARCstorage Library Installation And User Manual page 21

Now that you have unpacked the tape library, check the contents against the
packing slip to make sure you have the following items:
•
A SPARCstorage Library with at least one tape drive installed
•
Two power cords
•
SCSI cable (2 meters)
•
Removable tape cartridge holder
• data tape cartridges
• cover for cartridge holder
•
Cleaning cartridge
•
Regulated SCSI terminator
•
Accessory kit, containing:
• SCSI bus jumper block
• clean wipes
• door key
Note – If the tape library is not installed in the United States or Canada, you may
have to use a country-kit power cord. Consult your Sun sales representative for
further information.
Figure 1-2 Tape Drive and Carrier
SPARCstorage Library Product Description
Carrier
Tape Drive
Reject button
1
Locking lever
1-3