Changing The Control Mode - Sun Microsystems SPARCstorage Library Installation And User Manual

3

Changing the Control Mode

3-6
1. If you have not already done so, power on the tape library.
2. Press Escape on the Operator Panel to display the Main Menu.
3. Select the Interface Menu.
4. From the Interface Menu, press Enter to select the Control Mode Menu.
An asterisk next to a selection indicates the current active mode.
↓ ↑
5. Using and on the Operator Panel, scroll through the choices until the
arrow is next to the mode you want.
Scroll down to view the other options.
6. Press Enter to select the mode.
7. When the system status message at the bottom of the display indicates
that the change is complete, press Escape to return to the Control Mode
Menu.
SPARCstorage Library Installation and User's Guide—June 1995