4
4-26
Cycle L Axis Test
The Cycle L Axis test moves the CHM back and forth on the long axis the
number of times you specify.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Cycle L Axis by pressing
The system displays this screen:
Set Cycles
↑ Increase
↓ Decrease
4. Select the number of cycles (in increments of ten) you want the Cycle L
Axis test to run. Press
The test positions the CHM in front of the fixed cartridge slot and moves the
CHM back and forth on the long axis the number of times you specify.
To abort this diagnostic, press Escape and Enter.
SPARCstorage Library Installation and User's Guide—June 1995
↓
or
↓
or
↓
↑
or
, then Enter.
10
↑
↓
or
, then Enter.
↑
, then Enter.
↑
, then Enter.