Sun Microsystems SPARCstorage Library Installation And User Manual page 72

4
Main Screen
Displays main
screen
4-2
Interface Menu Configuration
Menu
Control Mode
Menu
LCD interface
SCSI interface
Sequential 1
Sequential 2
Dual Sequential
25-pin
9-pin
4-pin
Configure
25-pin Port Menu
(Not supported)
Configure
9-pin Port Menu
(Not supported)
Configure
4-pin Port Menu
(Not supported)
Figure 4-1 Primary Menu
When the Primary Menu is displayed, use the keys on the keypad to perform
the following functions.
↑
Scrolls up, often increases a value.
↓
Scrolls down, often decreases a value.
→
Scrolls right.
←
Scrolls left.
Help Goes to the Help screen.
Escape Goes forward/backward through menus.
Enter Selects the item next to the arrow.
Reset Goes to the reset screen.
SPARCstorage Library Installation and User's Guide—June 1995
Maintenance
Menu
Clean drive
Set SCSI IDs
Menu
Set Parity On/Off
Clean drive 1
Clean drive 2
Sequential
Options
Demo Menu
Restart 1
Slot Demo
Restart 2
Drive Demo
Loop 1
Loop 2
Diagnostics
Menu
Adjust Contrast
Self Test
Backlight On/Off
Position to Element
Park
Set Date
Move Cartridge
Scan
Set Time
Scan With Range
Home Gripper
Set Security
Home CHM
On/Off
Cycle Pick/Place
Cycle Gripper
Set Serial
Cycle S Axis
Number
Cycle L Axis
Cycle Solenoid
Library
Information Menu
SCSI Menu
SCSI Mode Params
SCSI Reservations
SCSI Sense Data
Statistics
System Sensors
Command History
Drive Info Menu
Drive 1 Status
Drive 2 Status
Inventory Menu
Label Info
Occupied Info
Position Info