Adding A Second Tape Drive; Removing The Empty Drive Carrier - Sun Microsystems SPARCstorage Library Installation And User Manual
Hide thumbs
Also See for SPARCstorage Library:
- User manual (102 pages) ,
- Installation manual (53 pages) ,
- Service manual (206 pages)
Table of Contents
Advertisement
6
Adding a Second Tape Drive
Removing the Empty Drive Carrier
!
6-2
Refer to the Tape Drive Quick Installation Card that came with your second drive
for graphical instructions.
1. Follow the ESD guidelines.
2. Obtain a flatblade screwdriver.
3. Halt the tape library's operations.
4. Turn off the power, then unlock and open the door.
5. Push against the base of the CHM to move it out of the way.
6. Loosen the two captive screws on the drive carrier faceplate with the
screwdriver.
7. Pull out the lever on the faceplate using your finger.
See Figure 6-2.
Caution – Do not try to pull out the lever without first loosening the screws.
8. Pull the empty drive carrier out of the slot.
SPARCstorage Library Installation and User's Guide—June 1995
Advertisement
Table of Contents
