Home CHM Test
The following actions occur during the Home CHM test:
•
CHM moves in and out on the short axis
•
CHM moves on the long axis
•
Gripper of the CHM closes and opens
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Home CHM by pressing
To abort this diagnostic, press Escape and Enter.
Cycle Pick/Place Test
The Cycle Pick/Place test picks a cartridge from the element you specify and
places it back in the same element. You can specify the number of times you
want this test repeated.
1. Select the Maintenance Menu by pressing
2. Select the Diagnostics Menu by pressing
3. Select Cycle Pick/Place by pressing
The system displays the following screen:
Set Source
↑ Increase
↓ Decrease
4. Select the element index of the cartridge slot from which you want the
CHM to pick and place the cartridge by pressing
The system displays this screen:
Set Cycles
↑ Increase
↓ Decrease
SPARCstorage Library Menu Functions
↓
↑,
or
then Enter.
↓
↑
or
, then Enter.
↓
↑
or
, then Enter.
↓
↑
or
, then Enter.
↓
↑
or
, then Enter.
↓
↑
or
, then Enter.
0
↑
or
10
4
↓
, then Enter.
4-23