7 USER SCREEN CREATION FUNCTION
MELSEC-Q
7.5 User Part Errors
If an error occurs in a user part (setting error, communication error, etc.), the
corresponding error code is displayed in the user part display area.
When an error occurred, the user part stops operating.
(Example) When an error occurred in a data block part
(Example) When an error occurred in an SSI read part
(Example) When an error occurred in a CGI write part
To restore the user part, eliminate the error cause according to the error code and
update the display screen in the Web browser.
Refer to Section 9.3 for the error code.
7 - 59
7 - 59