Mitsubishi MELSEC-Q Series User Manual page 439

9 TROUBLE SHOOTING
Error
Error name
code
0001h System error
Response time-out
0002h
error
0041h
0042h
System error
0043h
0044h
0045h Processing code error
Station No.
0046h
specification error
0047h Receive data error
0048h
0049h
004Dh
System error
004Eh
0050h
0051h
0055h Channel number error
0064h System error
Routing parameter
0065h
error
0066h Data send error
0067h Data receive error
0080h Read size error
0081h Device type error
0082h Device number error
9 - 14
Table Error Code List
Error definition
No response from the external
station.
An unsupported processing code
was issued.
The specified station No. is
incorrect.
Data are not received.
The Ethernet module is set so that
its write is disabled at RUN time.
No routing parameters are set.
Failed to send data.
Failed to receive data.
The read size is abnormal.
The specified device type is
invalid.
The specified device number is
outside the range.
Corrective action
• System error ( 1)
• Check the access target CPU
setting. (Refer to Section 4.6.7)
• Check the communication cable
status and access target CPU
status.
• System error ( 1)
• Check the CPU in the access
path.
• Check the station No. setting in
the access target CPU setting.
(Refer to Section 4.6.7)
• Check the CPU in the access
path.
• System error ( 1)
• Check the Ethernet module
setting of the target CPU.
• System error ( 1)
• Set routing parameters to the
CC-Link IE controller network,
MELSECNET/H, and/or
MELSECNET/10 module(s).
• Check the CPU in the access
path.
• Check the CPU in the access
path.
• Check the CPU in the access
path.
• Check the device type entered in
device monitor or component
setting.
• Check the device No. entered in
device monitor or component
setting.
(Continued on the next page)
MELSEC-Q
Error type
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
Continue
9 - 14