Mitsubishi MELSEC-Q Series User Manual page 206

6 FUNCTIONS
(When Data type is 16 bit integer/32 bit integer)
Item
CPU name
Device
Data type
Input form
Setting value
Set
Cancel
6 - 4
(2) Device test
Executing device test turns the bit device of the programmable controller CPU
on/off forcibly or changes the current value of the word device.
Only users with the device write authority are allowed to conduct this test.
Refer to Section 4.6.5 for the user authority.
[Setting screen]
[Setting Item]
Displays the CPU name on which the device test will be performed.
Specifies the device type and actual device number.
Selects the data type of the value to be set.
Selects the input form when the data type is 16 bit integer or 32 bit integer.
Sets the setting value.
Executes the device test.
Cancels the setting and returns to the Device monitor screen.
(a) CPU name
The CPU name on which the device test will be performed is displayed.
(b) Device
1) Specify the device type and actual device number.
2) Device specification by qualification (indexing, digit specification, bit
specification for word device) is not available.
(c) Data type
Select the data type of the value to be set.
Bit
16 bit integer : Set as a 16 bit integer. (Enabled when word device is used)
32 bit integer : Set as a 32 bit (double word) integer. (Enabled when word
(d) Input form
Select the input form when the data type is a 16 bit integer or 32 bit integer.
DEC: Set in decimal.
HEX: Set in hexadecimal.
(When Data type is Bit)
Description
: Set in bit unit. (Enabled when bit device is used)
device is used)
MELSEC-Q
6 - 4