Mitsubishi MELSEC-Q Series User Manual page 401

8 DEDICATED INSTRUCTION
Control data
Device Item
Completion
(S) + 0 type/transfer
form
Completion
(S) + 1
status
Transfer source
(S) + 2
No.
(S) + 3
to System area
(S) + 10
(S) + 11 Clock set flag
(S) + 12
Clock data
(S) + 13
(Set only when
(S) + 14
an error occurs)
(S) + 15
(S1) + 16
to File name
(S1) + 21
8 - 13
b15
0
1) Completion type (b7)
Set whether or not the clock data will be set to (S1) + 11 to (S1) + 15
in the case of abnormal completion.
0: Not set
1: Set
2) Transfer form (b8)
Specify the transfer file type.
0: A user data file (binary file) is transferred.
1: A user data file (CSV file) is transferred.
The status of the instruction completion is stored.
0 : Normal completion
Other than 0 : Abnormal completion (Error code) ( 2)
Set the file transfer source with the setting No. of "FTP setting".
1 to 16: Transfer source No.
Whether the clock data of (S1) + 12 to (S1) + 15 is enabled or disabled
is stored.
0: Disable 1: Enable
Upper 8 bit: Month (01 to 12
H
digits of the year
Upper 8 bit: Hour (00 to 23
H
Upper 8 bit: Second (00
H
Upper 8 bit: Year (00 to 99
H
Lower 8 bit: Day of the week (00
Specify a file name with a character string when attaching a user data file.
• Specify a name (8 characters) + period + extension (3 characters)
within the specified number of characters.
• When omitting an extension, also omit a period (".").
1 The setting side is as follows.
• User : Data are set by the user before execution of the dedicated instruction.
• System : The execution result of the dedicated instruction is stored by the
programmable controller CPU.
2 Refer to Section 9.3 for the error code.
Setting data
b9 b8 b7 b6
2) 1)
), Lower 8 bit: Year (00
H
), Lower 8 bit: Day (01
H
to 59 ), Lower 8 bit: Minute (00
H
) First 2 digits of the year
H
(Sun.) to 06 (Sat.))
H H
Setting
range
b0
0
(As in the
1 to 16
to 99 ) Last 2
H H
to 31 )
H H
to 59 )
H H
String
MELSEC-Q
Setting side
( 1)
User
left)
System
User
0, 1 System
System
User
8 - 13