System Configuration For Initial Setting, Maintenance And Inspection - Mitsubishi MELSEC-Q Series User Manual

2 SYSTEM CONFIGURATION

2.3 System Configuration for Initial Setting, Maintenance and Inspection

2 - 6
This section shows a system configuration in the case of initial setting (system setting,
dial-up setting), maintenance and inspection of the Web server module.
(1) System configuration for initial setting, maintenance and inspection
by Web browser
Web server module
Web server module
POINT
(1) Set the same network address to the Web server module and external device.
(2) When changing the Web server module's IP address after initial setting,
change the system setting to the default by the switch setting of GX Developer
and make initial setting again.
(Refer to Section 4.7 for the switch setting of GX Developer.)
(2) System configuration for switch setting, sequence program creation
and PLC diagnostics by GX Developer
Web server module
CPU module
Twisted pair cable
(crossing cable)
Ethernet
or
Twisted pair cable
(straight cable)
Ethernet
Hub
RS-232 cable
or
USB cable
MELSEC-Q
External device
External device
External device
2 - 6