Network Setting Of Personal Computer For One-To-One Connection - Mitsubishi MELSEC-Q Series User Manual

4 SET-UP AND PROCEDURE BEFORE OPERATION

4.5 Network Setting of Personal Computer for One-to-one Connection

4 - 11
Connect the Web server module with the personal computer on a one-to-one basis,
and set the Web server module from the Web browser on the personal computer.
This section explains the network setting of the personal computer when the Web
server module and personal computer are connected on a one-to-one basis.
(1) System configuration for one-to-one connection
Web server module
(2) Network setting of personal computer
(a) Set the personal computer and the Web server module to the same
network address.
Network
IP address 192.168.3.
255.255.255.
Subnet mask
Web server module
(b) Make the network setting of the personal computer on the "TCP/IP
Properties" screen.
(Example) In the case of Microsoft
(c) Restart the personal computer to make the network setting valid.
Crossing cable
Set the same value.
Host
3
0
[Control panel] [Network]
Properties" Screen <IP Address> tab
Personal computer
Network Host
192.168.3. 1
255.255.255. 0
personal computer
Windows 98 operating system
R R
<Configuration> tab
MELSEC-Q
Set different
values
"TCP/IP
4 - 11