Mitsubishi MELSEC-Q Series User Manual page 483

APPENDIX
Added/Changed Function
User screen creation function
Dedicated instruction
Added/Changed Function
Performance specifications
User screen creation function
App - 14
• The following applet parts were added.
1) Write button parts
2) Device monitor parts
3) Tag data monitor parts
4) Logging monitor parts
5) Event history monitor parts
6) PLC diagnostics monitor part
7) Self-diagnostics monitor parts
• The following SSI parts were added.
1) SSI read parts
• The following CGI parts were added.
1) CGI write parts
2) CGI read parts
3) Disconnect parts
• The following user parts were changed.
1) Some parameters of the user parts were changed to the items
that must be set. (Error occurs if not set)
Refer to Appendix 5.2 for the parameters that must be set.
2) In the data block parts, a change was made to enable write to a
tag component (parameters WRITE, LANGUAGE were added).
3) "APLCOLOR" was added to the parameters of the graphic display
parts.
• The following dedicated instructions were added.
1) FTPGET instruction
2) WFWRITE instruction
3) WFREAD instruction
4) WFDEL instruction
• The following dedicated instructions were changed.
1) A change was made to enable a user data file to be specified as
an attached file in the WMSEND instruction.
2) A change was made to enable a user data file to be specified as a
transferred file in the FTPPUT instruction.
(2) Module with first 5 digits of serial No. 07042 or later
• The following browser (Java VM) is supported.
Sun Microsystems JRE(J2SE) v1.5
• The following applet parts were added.
1) Audio parts
Description
Description
MELSEC-Q
(From the previous page)
Reference
Section
Chapter 7
Appendix 5.2
Chapter 8
Reference
Section
Section 3.1
Section 7.2.6
App - 14