Mitsubishi MELSEC-Q Series User Manual page 191

5 CONNECTING WEB SERVER MODULE TO NETWORK
Item
Send e-mail account setting
E-mail address (To:) setting
Item
Notification IP address
Item
IP address notification
Item
Account setting No. 1
5 - 10
3) E-mail setting (Refer to Section 6.6.3)
4) Address notification setting (Refer to Section 6.9.2)
[IP address setting]
[E-mail notification setting]
5) Account setting (Refer to Section 4.6.5)
POINT
After changing the setting, make sure to click on the "Save" button.
The settings are updated when the "Update" button on the Setting update screen is
clicked, the programmable controller is powered off and then on, or the CPU module
is reset. ( )
Note that the settings of the System setting and Dial-up setting are not updated
even if the "Update" button is clicked.
Enter the e-mail setting of the Web server module.
• SMTP server name
• E-mail address (From:)
• User name
• Password
• Confirm password
Enter an e-mail address (To:) of the personal computer.
• No. 1
• Select "Notify the IP address set in the "System setting" screen.".
• Select "Notify the HTTP port number set in the "System setting"
screen.".
• Select "Notify an IP address at network connection".
• Select "E-mail address (TO:) No. 1" as the destination of IP
address notification.
Enter the following setting for the accounting setting No. 1.
(Delete the default account.)
• User name
• Password
• Confirm password
MELSEC-Q
Set value
: (example) mailserver@****.****.ne.jp
: (example) mailaddress@****.****.ne.jp
: (example) mitsubishi@****.****.ne.jp
: (example) MITSUBISHI
: (example) MITSUBISHI
: (example) pcmailaddress@****.****.ne.jp
Set value
Set value
Set value
: administrator001
: (example) QJ71WS96ADMIN
: (example) QJ71WS96ADMIN
5 - 10