Mitsubishi MELSEC-Q Series User Manual page 379

7 USER SCREEN CREATION FUNCTION
Item
TAGNO
ELMNO
DATA
CONFIRM
RESULT
REFERER
LANGUAGE
7 - 50
(2) Parameter
Sets the tag, where a value will be written, with the tag setting No.
(Refer to Section 6.3.3.)
Sets the component, where a value will be written, with the
component setting No. (Refer to Section 6.3.3.)
Sets the value to be written. ( 1) ( 2)
Sets whether the confirmation screen will be displayed or not.
0: Not displayed 1: Displayed
• Selects how to display the result screen.
0: Display the result screen with the [Return] button
1: Display the result screen with the [Close] button
• Specify this item when a script is described to open the other
window and display the result.
• Specifies the file name of the execution screen with the
absolute path.
When standard ROM is used: /USER/file name
TM
When Compact Flash
Clicking the [Return]/[Cancel] button returns to the execution
screen.
Selects the language of the confirmation and result screens.
0: Japanese 1: English
1 When operation specification has been set to the target component, an
inverse operation is performed on the setting value using the operation
specification and the result is written to the device.
(Example) When "100" is set as the setting value for the component in
Note that, an error may be produced between the setting value and the
actually written component value.
(Example) When "107" is set as the setting value for a component in
Description
card is used: /CF/USER/file name
which "Single word" has been set as Data type and " 2" as
Operation specification, "100 / 2 = 50" is actually written to
the device.
which "Single word" has been set as Data type and " 2" as
Operation specification, "107 / 2 = 54" is actually written to
the device.
The component value to be displayed on the Tag data
monitor is "54 2 = 108".
In the above case, the following confirmation screen is
displayed when CONFIRM = 1.
MELSEC-Q
Setting Range Initial Value
1 to 64 Must be set
1 to 64 Must be set
Depends on
the data type
of the Must be set
specified tag
component.
0, 1 1 (Displayed)
0 (Display the
screen with
0, 1
the [Return]
button)
Return to the
execution
String screen.
(Refer to (3)
(d))
0, 1 1 (English)
7 - 50