Mitsubishi MELSEC-Q Series User Manual page 190

5 CONNECTING WEB SERVER MODULE TO NETWORK
Item
Network type setting
IP address setting
DNS server setting
Automatic network connection setting at start-up
Item
Connection method
Connection account
5 - 9
(1) Contract with Internet service provider
(a) To connect the Web server module to the Internet, a contract with an
Internet service provider is required.
Contact the Internet service provider for service details and how to sign up
for the service.
(b) Create a proper environment for the external device (personal computer) so
that Internet connection is available.
POINT
It is recommended to confirm in advance that access to the Internet is available
from the personal computer, etc. using the connection account of the Web server
module.
(2) Network setting of Web server module
(a) Make setting to connect the Web server module to the network.
(b) From the Administrative menu, set as follows.
(For other than the following settings, the default values.will be used.):
[Administrative menu]
(Refer to 2))
(Refer to 4))
1) System setting (Refer to Section 4.6.3)
2) Dial-up setting (Refer to Section 4.6.4)
"System setting" (Refer to 1))
"E-mail setting" (Refer to 3))
"Account setting" (Refer to 5))
Select "Dial-up to the network (modem, ADSL).".
Select "Obtain an IP address automatically.".
Select "Obtain a DNS server address automatically.".
Select "Automatic connection to network at start-up.".
Select "ADSL".
Enter the account obtained from the Internet service provider.
• User name
• Password
• Confirm password
MELSEC-Q
"Dial-up setting"
"Address notification setting"
Set value
Set value
: (example) mitsubishi@****.****.ne.jp
: (example) MITSUBISHI
: (example) MITSUBISHI
5 - 9