Mitsubishi MELSEC-Q Series User Manual page 69

3 SPECIFICATIONS
Device
Signal Name
No.
File access stop
Y2
request
File access stop
Y3
cancel request
Network
Y5 connection
request
Network
Y7 disconnection
request
Device write
YA
disable request
Y10 Error clear request
3 - 18
(2) Output signal details
(1) Turns on when file access is stopped.
(2) Refer to X2 for ON/OFF timing.
(1) Turns on when a file access stop is canceled.
(2) Refer to X2 for ON/OFF timing.
(1) Turns on when the Web server module is connected to the network.
(2) Refer to X6 for ON/OFF timing.
(1) Turns on when the Web server module is disconnected from the network.
(2) Refer to X8 for ON/OFF timing.
(1) When this turns on, writing from the device test/tag component test by a write-authorized
user is disabled.
(2) When this turns off, writing from the device test/tag component test by a write-authorized
user is enabled.
(1) Turning this on during module continue error occurrence (ERR. LED on) turns off the
ERR. LED and X10 to X19 and X1C. ( )
The ERR. LED does not turn off if Y10 is turned on during module stop error
occurrence (ERR. LED flicker).
(2) Clears the current error area (address: 140 to 145) of the buffer memory.
Clears the latest error code displayed in the system monitor of GX Developer. (Refer to
Section 9.2.2)
Description
MELSEC-Q
3 - 18