Mitsubishi MELSEC-Q Series User Manual page 497

APPENDIX
Label
10
SPEED
11 TIMEOUT
12
PAUSE
13
ATCOMMAND
14 CALL
15
DISCONNECT
16
DTIME
App - 28
Description
When "MODEM" or "DOPA" is
Communication
selected at CMETHOD
speed
When "ADSL" is selected at
CMETHOD
When "MODEM" or "DOPA" is
selected at CMETHOD
Calling timeout
When "ADSL" is selected at
CMETHOD
When "MODEM" is selected at
CMETHOD
Dial pause time
When other than the above is
selected at CMETHOD
When "MODEM" or "DOPA" is
AT command
selected at CMETHOD
additional
When "ADSL" is selected at
setting
CMETHOD
When
"MODEM" is
selected at
Call function
CMETHOD
When other than the above is
selected at CMETHOD
When
"MODEM" is
Disconnect selected at
CMETHOD
function
When other than the above is
selected at CMETHOD
When " MODEM " is selected at
CMETHOD and "YES" is selected
Disconnect time at DISCONNECT
When other than the above is
selected
1 USERNAME, PASSWORD and NUMBER1 can all be blanked.
However, if any one of the three has been set, the other two must also be set. (They
cannot be blanked.)
9600, 19200, 38400, 57600,
115200
(Blank)
90 to 180 (unit : seconds)
(Blank)
1 to 30 (unit : seconds)
(Blank)
Additional AT command (1 to
64 characters) or (blank)
(Blank)
Disable
Enable
(Blank)
Disable
Enable
(Blank)
1 to 30 (unit: minutes)
(Blank)
: Must be set
MELSEC-Q
Setting
Set value
requirement
NO
YES
NO
YES
: Need not be set (Invalid)
App - 28