Mitsubishi MELSEC-Q Series User Manual page 448

9 TROUBLE SHOOTING
Error
Error name
code
0600h Tag non-setting error
Component non-
0601h
setting error
Logging non-setting
0602h
error
Tag non-sampling
0603h
error
0604h Tag setting file error
Logging setting file
0605h
error
0606h Event setting file error
9 - 23
Error definition
At start-up or setting update, the
following was detected.
• The tag name with no setting
was specified in the logging
setting or tag event setting.
• The tag name specified in the
logging setting or tag event
setting was deleted.
At other than a start or setting
update, the following was
detected.
• The tag name with no setting
was specified in the logging
setting or tag event setting.
• The tag name specified in the
logging setting or tag event
setting was deleted.
The component name with no
setting was specified in the tag
event setting, or the component
name specified in the tag event
setting was deleted.
The logging with no setting was
specified for the Web browser or
dedicated instruction.
Though tag data monitor or
logging was performed, the target
tag was not sampled.
The tag setting file is missing or
destroyed.
The logging setting file is missing
or destroyed.
The event setting file is missing or
destroyed.
(From the previous page)
Corrective action
• Specify the tag name set in the
tag setting, or make the tag
setting. (refer to Section 6.3.3)
• Specify the component name set
in the component setting, or
make the component setting.
(refer to Section 6.3.3)
• Specify the logging preset in the
logging setting. (refer to Section
6.4.4)
• Execute again after a while.
• Select "Execute" in Sampling of
the tag setting.
(Refer to Section 6.3.3)
• After initializing the module (refer
to Section 4.13), make the tag
setting (refer to Section 6.3.3)
again.
• After initializing the module (refer
to Section 4.13), make the
logging setting (refer to Section
6.4.4) again.
• After initializing the module (refer
to Section 4.12), make the event
setting (refer to Section 6.5.3)
again.
(Continued on the next page)
MELSEC-Q
Error type
Stop
Display
Display
Display
Display
Stop
Stop
Stop
9 - 23