Mitsubishi MELSEC-Q Series User Manual page 247

6 FUNCTIONS
6 - 45
4) Start at the specified time.
Logging is started at the specified time.
Hour: 0 to 23, "Per"
Minute: 0 to 59, "Per" (Per minute can be specified only when Per hour
is specified)
Second: 0 to 59
1 Regardless of this setting, logging is performed when the dedicated
instruction LOG is executed.
(f) Condition for Stop
As the condition for stopping logging, select any of the following.
1) Do not stop.
• Logging is not stopped.
• Select this item for continuous logging.
2) Stop at the specified time after event occurrence.
Logging is stopped when the specified time (second) has elapsed after
the specified event occurred.
1) Select any of the event types.
2) Select the event setting number.
3) Set the logging stop time.
(Specify "0" when stopping logging at event occurrence.)
POINT
When above 2) is set as the condition for stop and the event set to the condition for
stop occurs twice before the specified time passes, the second event is valid as the
condition for stop.
(Example) When the condition for stop is set to 10 seconds after event occurrence
Event
Occurrence
Logging
3) Stop at the specified time.
Logging is stopped at the specified time.
Hour: 0 to 23, "Per"
Minute: 0 to 59, "Per" (Per minute can be specified only when Per hour
is specified)
Second: 0 to 59
1)
Occurrence
10 seconds
MELSEC-Q
2) 3)
Stop
6 - 45